2014, VOLUME 15 #3. "TRANSPORT AND TELECOMMUNICATION". ЖУРНАЛ ИЗДАТЕЛЬСТВА TSI, ISSN 1407-6160, ISSN 1407-6179 | TSI

Your question

We will be glad to answer any of your questions!

2014, VOLUME 15 #3. "TRANSPORT AND TELECOMMUNICATION". ЖУРНАЛ ИЗДАТЕЛЬСТВА TSI, ISSN 1407-6160, ISSN 1407-6179

THE ANALYTICAL DESCRIPTION OF REGULAR LDPC CODES CORRECTING ABILITY

Leonid Uryvsky1, Serhii Osypchuk

Institute of Telecommunication Systems
National Technical University of Ukraine “Kyiv Polytechnic Institute”
Kyiv, Industrialny Street, 2, Ukraine, 03057
E-mails: 1leonid_uic@ukr.net; 2serhii.osypchuk@ieee.org

The analytical description of regular LDPC (Low-Density Parity Check) codes correcting ability has been investigated. The statistical dependencies for the maximum number of corrected bits per the code word as a function of LDPC code word length and code rate are given based on multiple experimental analyses of LDPC check matrices. The analytical expressions are proposed for the cases of linear, exponential and polynomial approximations of given results. The most exact analytical formula is proved by criterion of the minimum divergence between the experimental and theoretical results.
Keywords: LDPC code, correcting ability, analytical description.

INTELLIGENT STORAGE SYSTEM BASED ON AUTOMATIC IDENTIFICATION

Peter Kolarovszki, Juraj Vaculík

University of Žilina, Faculty of Operation and Economics of Transport and Communications
Department of Communications
Univerzitná str. 1, 01026, Žilina, Slovakia
Phone: (+421) 908227492.
E-mail: peter.kolarovszki@fpedas.uniza.sk, juvac@fpedas.uniza.sk

This article describes RFID technology in conjunction with warehouse management systems. Article also deals with automatic identification and data capture technologies and each processes, which are used in warehouse management system. It describes processes from entering goods into production to identification of goods and also palletizing, storing, bin transferring and removing goods from warehouse. Article focuses on utilizing AMP middleware in WMS processes in Nowadays, the identification of goods in most warehouses is carried through barcodes. In this article we want to specify, how can be processes described above identified through RFID technology. All results are verified by measurement in our AIDC laboratory, which is located at the University of Žilina, and also in Laboratory of Automatic Identification Goods and Services located in GS1 Slovakia. The results of our research bring the new point of view and indicate the ways using of RFID technology in warehouse management system.
Keywords: RFID technology, warehouse, management, automatic identification, processes.

RESEARCH OF READABILITY AND IDENTIFICATION OF THE ITEMS IN THE POSTAL AND LOGISTICS ENVIRONMENT 

Peter Kolarovszki

University of Žilina, Faculty of Operation and Economics of Transport and Communications
Department of Communications
Univerzitná 1, 010 26, Žilina, Slovakia
Phone: +421 908227492. E-mail: peter.kolarovszki@fpedas.uniza.sk

This article deals with RFID technology, which is a part of automatic identification and data capture. Nowadays, the identification of parcels in postal sector is carried through barcodes. In this article we would like specify, how can be postal parcels located in postal container identified in the transmission process of postal main processing centre by UHF RFID technology. All results are verified by measurement in our AIDC laboratory, which is located at the University of Žilina. Our research contains 12 different types of orientation tags and antennas and more than 1000 tests. Our identification performance was close to 100%. All tested parcels were located in postal container. The results of our research bring the new point of view and indicate the ways using of UHF RFID technology in postal applications. At the end of this article the utilization of the RFID technology in postal logistics chain is characterized.
Keywords: RFID technology, logistics chain, parcels, identification, postal container.

AN APPLICATION OF COMPUTER VISION SYSTEMS TO SOLVE THE PROBLEM OF UNMANNED AERIAL VEHICLE CONTROL

Alexey Y. Aksenov1, Sergey V. Kuleshov2, Alexandra A. Zaytseva3

Saint-Petersburg Institute for Informatics and Automation of RAS
14th line V.O., 39, Saint-Petersburg, 199178, Russia
Phone: +7 812 3235139. E-mails: 1a_aksenov@mail.iias.spb.su, 2kuleshov@iias.spb.su, 3cher@iias.spb.su

The paper considers an approach for application of computer vision systems to solve the problem of unmanned aerial vehicle control. The processing of images obtained through onboard camera is required for absolute positioning of aerial platform (automatic landing and take-off, hovering etc.) used image processing on-board camera. The proposed method combines the advantages of existing systems and gives the ability to perform hovering over a given point, the exact take-off and landing. The limitations of implemented methods are determined and the algorithm is proposed to combine them in order to improve the efficiency.
Keywords: computer vision, unmanned aerial vehicle control.

DIGITAL ADVERTISING SYSTEM IN URBAN TRANSPORT SYSTEM OF ŽILINA TOWN

Radovan Madleňák1, Lucia Madleňáková2

The Faculty of Operation and Economics of Transport and Communications University of Žilina
Univerzitná 1, 01026, Žilina, Slovakia
1Phone: ++421/41/5133124.. E-mail: radovan.madlenak@fpedas.uniza.sk
2Phone: ++421/41/5133125. E-mail: lucia.madlenakova@fpedas.uniza.sk

The Internet and information and communication technologies (ICT) have changed everything: news, commerce, advertising, relating to others, getting information and transport too. It has changed how the people work, how they practice religion, how they date, how they spend the free time and how they travel. One of the technological innovations that are based on usage ICT in advertising space is digital signage. This article presents the results of research dedicated to investigate the relationships between customers-passengers and this new ICT technology in real environment. The results of the research stimulate the discussion about the future advertising practices in Žilina town. Based on the wide analysis of opportunities the digital signage technology in advertising practices, the presented marketing research investigates how passengers accept virtual advertising technology in urban transport system of Žilina town. Authors highlight the advantages of interactivity between digital signage technology and consumers. The conclusions of this article triggers further investigations in the area of the interactions between the digital advertising technology and passengers, and the passengers’ perception and acceptation of shopping activities on the basis of advertising in digital signage medias.
Keywords: digital signage, marketing digital media, transport system, calculation, ROI.

ANALYSIS OF INTRA-URBAN TRAFFIC ACCIDENTS USING SPATIOTEMPORAL VISUALIZATION TECHNIQUES

Ali Soltani1,2, Sajad Askari1

1Department of Urban Planning, Shiraz University, Iran, Goldasht St., Maaliabad, Shiraz
Phone: +987116230453. E-mail: soltani@shirazu.ac.ir
Urban Research program, Griffith University, QLD, 400, Australia
Phone: +61737357003. E-mail: a.soltani@griffith.edu.au

Road traffic accidents (RTAs) rank in the top ten causes of the global burden of disease and injury, and Iran has one of the highest road traffic mortality rates in the world. This paper presents a spatiotemporal analysis of intra-urban traffic accidents data in metropolitan Shiraz, Iran during the period 2011–2012. It is tried to identify the accident prone zones and sensitive hours using Geographic Information Systems (GIS)-based spatio-temporal visualization techniques. The analysis aimed at the identification of high-rate accident locations and safety deficient area using Kernel Estimation Density (KED) method. The investigation indicates that the majority of occurrences of traffic accidents were on the main roads, which play a meta-region functional role and act as a linkage between main destinations with high trip generation rate. According to the temporal distribution of car crashes, the peak of traffic accidents incident is simultaneous with the traffic congestion peak hours on arterial roads. The accident-prone locations are mostly located in districts with higher speed and traffic volume, therefore, they should be considered as the priority investigation locations to safety promotion programs.
Keywords: Accident; Traffic; Spatio-temporal Analysis; Shiraz.

ADAPTIVE TECHNOLOGY APPLICATION FOR VIBRATION-BASED DIAGNOSTICS OF ROLLER BEARINGS ON INDUSTRIAL PLANTS

Aleksey Mironov1, Pavel Doronkin1, Alexander Priklonskiy1, Sergey Yunusov2

1D un D centrs Ltd.
Margrietas Str. 7, Riga, LV-1046, Latvia
Phone: +371 67 468850. Fax +371 67 468856
E-mails: aleksei@ddcentrs.lv, pavel@ddcentrs.lv, pai_ev@inbox.lv
2Transport and Telecommunication Institute
Lomonosov Str. 1, Riga, LV-1019, Latvia
Phone: +371 26435655. E-mail: yunusov@inbox.lv

Roller bearings are widely used in equipment of different applications; therefore, the issues related to the assessment of bearing technical state and localization of bearing faults are quite important and relevant. The reason is that technical state of a bearing is a critical component, which determines efficiency of a mechanism or equipment. For bearings inspection and diagnostics, various methods of vibration-based diagnostics are used. The adaptive technology for vibration-based diagnostics developed in „D un D centrs” is an effective tool for evaluation of technical state of bearings in operation compared to the existing SKF method.
Keywords: roller bearing, vibration-based diagnostics, SKF method, deterioration, adaptive technology.

Choose a product
Amount of payment
EUR
Name, Surname
E-mail